WRL CV Wire Rope Lubricant
NLGI #00 | -50°C to 130°C
MOLYSLIP WRL-CV is a premium performance lubricant specifically designed to lubricate and protect steel wire ropes. Formulated from high quality base oils and incorporating advanced additive systems that minimize friction and wear MOLYSLIP WRL-CV delivers outstanding corrosion protection and lubrication to wire ropes operating in a range of environments.
WRL S Series Pseudoplastic Wire Rope Lubricant
NLGI #00 | -50°C to 130°C
MOLYSLIP S series products are premium performance lubricants specifically designed to overcome the challenge of effectively lubricating and protecting steel wire ropes. Formulated from high quality base oils and incorporating a pseudoplastic thickener system MOLYSLIP S series products solve the problem of balancing penetrating properties and wash-off resistance without the unnecessary compromises of conventional greases.
MOLYSLIP WRL-S series products are suitable for use on most wire rope types and constructions operating in a wide variety of conditions and equipment such as cranes, ports, oilfield, construction and mining. They can also be used in applications such as ROV umbilical cables to protect from corrosion.
- WRL-S10 is a translucent grease designed to allow easy inspection of the rope
- WRL-S15 is a solvent containing version of S10, designed to allow the product to be applied via a pressure sprayer
- WRL-S20 is a graphite reinforced version of S10 with enhanced load carrying for arduous operations.
WRL E40 VGP Compliant Wire Rope Lubricant
NLGI #1 | -40°C to 130°C
MOLYSLIP WRL-E40 is a premium performance lubricant specifically designed to lubricate and protect steel wire ropes and umbilical cables operating in marine environments. Formulated from a combination of bio-based, renewable oils complimented with performance additives that are proven to be non-toxic to aquatic organisms, MOLYSLIP WRL-E40 is certified to the EU Eco-label scheme and is therefore fully compliant with the USA EPA Vessel General Permit (USA VGP 2013).
Arvina OG Series High Load open gear greases
NLGI # 0/2 | -30°C to 150°C
ARVINA OG range are premium quality, clay thickened greases formulated using a combination of highly refined mineral base oils and synthetic advanced additives. These greases are specifically developed for open gear lubrication and contain adhesion improvers, which provide the greases with excellent resistance to fling-off and water wash-off.
The ARVINA OG range has excellent anti-wear, extreme pressure & anti-rust properties, as well as graphite particles to provide the grease with increased loadbearing capability. Arvina OG 0 has been specifically formulated to be sprayable whilst Arvina OG 2 has excellent pumpability.
Arvina AW High Load, extreme environment grease
NLGI 0/00 | -40°C to 150°C
MOLYSLIP ARVINA AW is a premium performance grease formulated using a combination of highly refined mineral base oils and advanced synthetic additives that has been specifically designed to operate in the most extreme environments. The superior water resistance and corrosion protection offered by ARVINA AW facilitates use in applications subjected to frequent wash down or total immersion in water where the products excellent water displacing properties allow it to be applied in-situ to cold/wet metals.
MOLYSLIP ARVINA AW is ideal for the lubrication of open gear sets of rotary kilns, tube and ore mills, semi-enclosed drive gears, jack-up screws, racks, slideways, crown gears, valves, shafts, pivots, joints and articulations, pin bush connections, injector head chains and all slow-moving anti-friction and plain bearings etc.
